If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?
If nothing inside the home was altered you should not be getting a smell. Personally I'm confused as to why the repair person would have left the original line there and ran another one through a new hole. I would have pulled the old line up, ran the new line (in PVC) and used the same hole in the septic tank instead of creating a new one. Did he seal up the hole in the tank from the old line?
An apprenticeship is the most common pathway to becoming a plumber. Many unions and businesses mandate that an apprentice receive a minimum of 246 hours of technical education, which could include instruction in math, applied physics and chemistry, and up to 2,000 hours of paid, practical training working with an experienced plumber. Safety training is also an important component of the process, since injuries are common in this line of work. "We have many hours worth of [Occupational Safety and Health Administration] training before we go on to a job site," says Patrick Kellett, the administrative assistant to the general president for the United Association of Journeymen and Apprentices of the Plumbing, Pipe Fitting Industry of the United States, Canada and Australia. "We're very conscious of the dangers that come with working in construction."
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
Most large cities today pipe solid wastes to sewage treatment plants in order to separate and partially purify the water, before emptying into streams or other bodies of water. For potable water use, galvanized iron piping was commonplace in the United States from the late 1800s until around 1960. After that period, copper piping took over, first soft copper with flared fittings, then with rigid copper tubing utilizing soldered fittings.
Awesome experience with Charlie's Rooter Service! Our outside area drains were overflowing when it rained and about to flood toward the house.  I called Charlie's and they had Luis come over within an hour.  Luis was super friendly and ready to help when he arrived.  He figured out the problem and snaked the street drain and pulled out a huge clump of roots that were clogging it up!  But there was still some backup flooding on the side that he was able to isolate to get rid of the mud and debris that were clogging that up.  Before leaving, Luis even gave suggestions on how to flush it out periodically to keep things flowing smoothly.  Luis is the best and I would definitely use him for future plumbing problems, highly recommended!

Plumbing Service

×