Pipefitters, sometimes simply called fitters, install and maintain pipes that carry chemicals, acids, and gases. These pipes are used mostly in manufacturing, commercial, and industrial settings. Fitters install and repair pipe systems in power plants, as well as heating and cooling systems in large office buildings. Some pipefitters specialize as gasfitters, sprinklerfitters, or steamfitters.
My parents are in their middle eightys and my mother is at home with cancer. They live in SaintAugustine Florida.My problem is their two toilets will not flush all the way down the drain. I. have been down there twice to help them but I cannot drive 1200 miles each time they have a problem.So for now I would like to know what I can translate to my father over the phone to remedy this situation. Thank you very much Ray Dupuis.
I can't say enough good things about Elek Plumbing and the job David Marshall did. We had a flood in our basement due to a clogged out-take pipe. We called Elek because it was a Sunday and they offered emergency service. David showed up quickly and got to work immediately. Not only did he do a fantastic job, but he was friendly and kind as well. Elek's prices were extremely reasonable considering it was an emergency call on a Sunday. I HIGHLY recommend Elek.. ask for David if you can! He's the best!read more
Not only plumbers, but good electricians are tough to locate. Finding the ideal workmen for your appliances is harder than ever. The Apache Junction is full of people who claim to be experts. However, getting a fix for your appliances by them is never viable. They provide lousy services. They also charge too much money. Paying such high amount is not sensible if services are poor. The customer can be in confusion in such cases. With Apache Junction Electrician at your doorstep, you can drop the confusion. We provide the best job for all types of appliances.
Most states and localities require plumbers to be licensed. Although licensing requirements vary, most states and localities require workers to have 2 to 5 years of experience and to pass an exam that shows their knowledge of the trade and of local plumbing codes before they are permitted to work independently. In addition, most employers require plumbers to have a driver’s license.
The Eccotemp EZ-FLUSH System Descaler Kit is the The Eccotemp EZ-FLUSH System Descaler Kit is the answer to any water scale lime or rust deposit buildup in virtually any piece of water based equipment. The EZ-FLUSH system has been designed to work seamlessly with Tankless Water Heaters and is compact for easy use and storage. It includes our ...  More + Product Details Close
The health of the plumbing system is of utmost importance when buying a home. You need to be sure that all systems are operating at optimal performance before signing on the dotted line. A Buckeye Rooter Plumbing Repairwill provide home plumbing inspections and/or property inspections. We want to make sure there are no unpleasant plumbing surprises that can be costly for you to deal with later.
B&L Plumbing Service, Inc. offers a variety of residential and commercial plumbing services in the Kansas City metro area. We are a family owned and operated business and have been satisfying our customers since 1998. At B&L Plumbing, we go above and beyond to take care of our customers and are always ready to take care of any problem that you may have with your plumbing systems. We know your time is valuable. That is why when you call, we will arrive when you need us with a skilled service technician and a well stocked truck ready to troubleshoot, and repair your plumbing problem on the spot.

I can't say enough good things about Elek Plumbing and the job David Marshall did. We had a flood in our basement due to a clogged out-take pipe. We called Elek because it was a Sunday and they offered emergency service. David showed up quickly and got to work immediately. Not only did he do a fantastic job, but he was friendly and kind as well. Elek's prices were extremely reasonable considering it was an emergency call on a Sunday. I HIGHLY recommend Elek.. ask for David if you can! He's the best!read more

One easy repair is fixing a constantly running motor. If you have a submersible motors (ones that are designed to sit inside the pit or well), this is usually caused by dirt or debris getting lodged under the float switch, which is the large floater bulb that looks very similar to the one in the back of your toilet. Make sure you know how to drain and clean out your sump pit, or have your plumber show you the next time you hire one.
The customer service was top notch! David and Christian were very respectful from the moment they arrived at my home. They were very knowledgeable and honest. Neither tried to upsell me on anything I did not need and they were sure to guide me in the right direction on the repairs that I should have done. They kept me informed on how the progress was going through out the whole process and made me feel very glad to have chosen Elek for my plumbing repairs. A++ overall on the whole experience! The only recommendation I have is that Elek should expand to other states (Michigan).read more
Over the years, Reliable Rooter Service has enjoyed building relationships in the community. We know that doing a satisfactory job is only part of the experience, so we strive to provide the friendliest service around. Our outstanding reviews and reputation serve as an example to the quality plumbing service provided by Reliable Rooter Service. We guarantee satisfaction on all residential and commercial plumbing repairs in Greeley, Fort Collins, Loveland, and Brighton CO. Call today for a free inspection and quote.
Drawing from more than a century of experience, Elek continues to provide Allentown, Bethlehem and Easton with exceptional service, knowledgeable support and a friendly smile. At Elek, our ultimate goal is not only to serve the customers who need us today but to partner with their families throughout generations to come. We realize the only way to accomplish this goal is by earning the community’s trust and building confidence in our guaranteed quality, dependability and professionalism.
Using corrosive chemicals to dissolve a clog is like throwing a grenade down a gopher hole. Instead, Wroblewski recommends flushing your drains weekly with a half cup of baking soda and one cup of vinegar. Let it fizz in the drain for ten minutes, then pour in four cups of boiling water. Find out about the plumbing nightmares that will make you cringe.
The trick to caulking tubs and showers is using the right type of caulk. There are many different kinds of caulk out there that are used for home repair, from filling cracks in drywall to sealing off plumbing appliances. Make sure you check the label, and only get caulk that is designed for tubs and showers, or ask someone at the hardware store for help. Go for quality when you purchase a caulking gun. They aren't that expensive, and they are easier to use and last longer.
Get a minimum of three bids. Estimates for an average-sized job should be within a few hundred dollars. Be suspicious of anything that is substantially lower or double the price of the rest, and watch out for hidden fees, like charges for travel expenses. They could be signs of a home improvement scam. A good plumber will not nickel and dime you like this, and many of us will offer free estimates.

I called John, of JD’s Plumbing on a Saturday afternoon, after the hot-water pipe under the bathroom sink blew-out. John was able to contact his tech, Jimmy, who came right out, at the end of his day and fixed the pipe just in time for our guests to arrive and for Jimmy to get to his grandfather’s birthday dinner! He did not have to come out – his...


The issue is same with plumbing work. Fixing taps and leakages is not easy. You cannot do plumbing work by yourself. This is different that electrician work in this aspect. Plumbing needs skills and equipment. Without them, one cannot fix the issue. If you have a problem with pipes or taps, you need a plumber. You also need him if you need to install new taps or geyser or such devices. But you have to ensure that the plumber that you hire is an expert. Finding such a plumber with skills is not easy in Apache Junction.
Cory was out here and did fantastic work. He was very fast and efficient and was upfront about all pricing. Very high quality work, super knowledgeable and showed us/ explained everything to us before he did it so we had an idea of what was going on. Really friendly guy, 4/5 because he didnt plug the coffee makers back in >:( Just kidding, in all seriousness he gets 5/5 and I would recommend Deans to anyone and everyone.
Plumbers install and repair water, drainage, gas, and other piping systems in homes, businesses, and factories. Plumbers install plumbing fixtures such as bathtubs and toilets, and appliances, such as dishwashers and water heaters. Plumbers also maintain septic systems—the large, underground holding tanks that collect waste from houses that are not connected to a sewer system.
Plumbers install and repair water, drainage, gas, and other piping systems in homes, businesses, and factories. Plumbers install plumbing fixtures such as bathtubs and toilets, and appliances, such as dishwashers and water heaters. Plumbers also maintain septic systems—the large, underground holding tanks that collect waste from houses that are not connected to a sewer system.
Present-day water-supply systems use a network of high-pressure pumps, and pipes in buildings are now made of copper,[25] brass, plastic (particularly cross-linked polyethylene called PEX, which is estimated to be used in 60% of single-family homes[26]), or other nontoxic material. Due to its toxicity, most cities moved away from lead water-supply piping by the 1920s in the United States,[27] although lead pipes were approved by national plumbing codes into the 1980s,[28] and lead was used in plumbing solder for drinking water until it was banned in 1986.[27] Drain and vent lines are made of plastic, steel, cast-iron, or lead.[29][30]
According to standards set by the federal government, a low-flow showerhead uses no more than 2.5 gallons of water per minute at a water pressure of 80 pounds per square inch. That’s less than half the rate of water used by some older traditional showerhead models. Low-flow showerheads come in two main types, aerating, which creates a mist, or laminar-flow that sends water out in a steady stream.
Gilberto from Elek Plumbing was 'the big three': he was on time, he was highly professional, and he really knows his stuff. He told me what he was doing and why every step of the way, and the biggest treat for me was that he encouraged my curiosity and didn't mind all my questions about how things worked. When issues with plumbing arise in the future, I certainly hope Elek sends Gil to answer my call. Both he and the scheduler were very clear about what I should expect in terms of the work and the cost and I thank them both!read more
Gilberto from Elek Plumbing was 'the big three': he was on time, he was highly professional, and he really knows his stuff. He told me what he was doing and why every step of the way, and the biggest treat for me was that he encouraged my curiosity and didn't mind all my questions about how things worked. When issues with plumbing arise in the future, I certainly hope Elek sends Gil to answer my call. Both he and the scheduler were very clear about what I should expect in terms of the work and the cost and I thank them both!read more
When you need honest, reliable plumbing, heating, or cooling services in Northern Virginia, suburban Maryland, or throughout the D.C. area, look no further than My Plumber Heating and Cooling! We’re proud to be the region’s number one choice for home comfort since 1982. Whether you’re dealing with a broken air conditioner, outdated heating system, backed-up drain, or burst pipe, our highly trained team is ready to help. We offer everything from emergency plumbing repairs to new heating and air conditioning system installation to indoor air quality services and more. Most of all, we stand behind everything we do with extensive warranties and our 100% customer satisfaction guarantee. At My Plumber Heating and Cooling, your comfort is our priority! We have three convenient locations in Manassas, Fairfax, and Fredericksburg so that you don't have to wait to get the help you need.
There’s often an Allen wrench that comes with the garbage disposal. I keep it under the sink. When the thing jams, follow the directions in the manual, and I won’t need to come out. Another plumbing tip, don’t believe the myth about putting lemon peels in the disposal to make it smell better. That will just make it jam faster.  These are the things you should never pour down the drain.
The Handy customer service team is online 24 hours a day, 7 days a week. If you have any concerns either before, during, or after your job, someone will be in contact with you to help make things right. No matter how big or small your job is, we’re confident that you’ll be satisfied by the affordable plumbers on the Handy platform. When you book local plumbing services through Handy, you’re in charge of when the work gets done. And should your situation change, you can always cancel or reschedule your appointment with at least to 24 hours’ notice.
The thicknesses of the water pipe and tube walls can vary. Pipe wall thickness is denoted by various schedules or for large bore polyethylene pipe in the UK by the Standard Dimension Ratio (SDR), defined as the ratio of the pipe diameter to its wall thickness. Pipe wall thickness increases with schedule, and is available in schedules 20, 40, 80, and higher in special cases. The schedule is largely determined by the operating pressure of the system, with higher pressures commanding greater thickness. Copper tubing is available in four wall thicknesses: type DWV (thinnest wall; only allowed as drain pipe per UPC), type 'M' (thin; typically only allowed as drain pipe by IPC code), type 'L' (thicker, standard duty for water lines and water service), and type 'K' (thickest, typically used underground between the main and the meter). Because piping and tubing are commodities, having a greater wall thickness implies higher initial cost. Thicker walled pipe generally implies greater durability and higher pressure tolerances.
One easy repair is fixing a constantly running motor. If you have a submersible motors (ones that are designed to sit inside the pit or well), this is usually caused by dirt or debris getting lodged under the float switch, which is the large floater bulb that looks very similar to the one in the back of your toilet. Make sure you know how to drain and clean out your sump pit, or have your plumber show you the next time you hire one.
Another way to avoid a service call from your plumber is to make sure the outside faucets are turned off in the winter and make sure you disconnect the outside hoses. You need to shut the water off from the inside. Then, open the valve on the outside to let the water that’s in there drain out—you switch both of them to the opposite direction so one is always closed and one is always open. We have to fix tons of these in the spring mostly because people leave their outside hoses connected and they freeze up. The repair could cost $100-$200 or more. Another tip would be if you’re going away for any length of time, like on vacation, turn off your water. If on any of those days the temperature drops below freezing, have someone check in on your house. I’ve been called to homes where the family returned from vacation, and there was water flooding out from the front door.

When you’re searching for a dependable Dallas plumber or Dallas plumbing company “near me” which offers licensed and trained plumbers for any plumbing repair or plumbing installation like water heaters, tankless heaters, garbage disposals, drain or sewer lines, water filtration, water softening or other plumbing needs, call 214-892-2225214-892-2225.
The scenario is similar when it comes to hiring an electrician. The Chandler is full of novice technicians who provide lousy services. You can never rely on such workmen to provide you with good work. They will always lag in some aspect or the other. Some technicians charge a fee that is too high. These are the workmen who rip-off the customer and do not care about him. Other technicians do not use genuine parts. This leads to the coming back of the issue within a few days. You have to strike the right balance.
×