David responded to our call within minutes. We had a plumbing emergency and he came to us as soon as he finished a job he was on, which was about a few hours. David and his apprentice Cameron were respectful and pleasant to do business with. David explained everything to us and gave us a look at the camera as it snaked through our pipes. We will definitely call this company if need service again.read more

If you own a home and your plumbing toolkit consists of a lone plunger, chances are sooner than later you’ll need to tap into the knowledge or advice from someone versed in common plumbing repairs. Ace can help you in a pinch. While a plunger can be handy in several different scenarios, Ace Hardware has the plumbing tools, plumbing supplies and knowledgeable plumbing advice on hand to face a plumbing problem head on.
Tree roots, corrosion, and debris can build up and threaten the healthy functioning of your home’s drains and sewer lines. When this happens, you need a professional rooter service to solve the problem and address your home’s plumbing needs. A rooter is a drain cleaning machine that was invented to unblock drains that have been clogged from tree roots and other hard to reach debris.
I had 207 Plumbing come to fix a leak in my ceiling.  It's a terrible, terrible company to do business with.  He came and fixed a broken pipe in the ceiling, and I asked him to check the rest of the pipe to make sure that nothing else was broken, he said everything was OK and charged me $219.00 for 45 minutes and left.  Never cleaned up his mess.  I went to clean up the mess after he left and found there was more damage to the pipe.  I called him to come back, which he did.  He looked at the water coming down from the ceiling, into a light fixture and said he had another job to go to and couldn't come back until next week.  He also wanted to charge me $350.00 to come back.  I told him that was too much and he said he would make an exception and only charge me $219.00.  Now I have major damage done to the ceiling, the light fixture and the floor.  All of this could have been prevented if he had stayed and fixed the problem.  I will NOT hire him again.
Most large cities today pipe solid wastes to sewage treatment plants in order to separate and partially purify the water, before emptying into streams or other bodies of water. For potable water use, galvanized iron piping was commonplace in the United States from the late 1800s until around 1960. After that period, copper piping took over, first soft copper with flared fittings, then with rigid copper tubing utilizing soldered fittings.
I had an emergency at 12 am on a Sunday morning and I called to set up someone to come out. David M. got here very quick and fixed my sewer back up in the lower level in a reasonable amount of time. He did an amazing job. He was very nice and professional. He advised us what the issues were and gave us recommendation on what not to flush down the toilets. The price was reasonable, I will definitely be using this service again and I highly recommend this company. Thank you for your services!read more

Shop with confidence from a team you can trust. We are the pioneers of the online plumbing supply industry and have a deep understanding of unique, hard-to-find plumbing parts. We opened our online store in 1995, and we're still going strong today. Born into a world without Google, surviving the dot-com bubble, and flourishing in our 24th year, we continue to offer unrivaled customer service and a vast inventory. Because we don't believe in minimum orders, you have the freedom to order exactly what you need, anytime, anywhere.
Fixing appliances is not easy. It is tough as well as risky. You stand the risk of getting an electric shock. You should never handle them yourself. It is the job of a good workman. Hiring a workman is also necessary for reliable work. An expert provides work that lasts long. This is true for all types of devices. If you are not hiring a workman with experience, the issue will come back. You need to take care while choosing the workman. A poor workman will cost you money and the issue will still be there. You need to avoid this at all costs.
We've only been in our home a few months and I noticed that they had a Dean's sticker on the furnace with a service line so I thought I would give them a try...I'm so glad I did! Ray R. came out to our house right away the next morning and he was awesome! He was super friendly and knowledgeable and he was great at talking me through what he was checking and doing. As a first time homeowner I was extremely appreciative of all of the knowledge he was able to pass along about our specific unit and all heating and cooling in general.

 David and his associate were very professional and I must say very tolerant of my many questions, even when they didn't pertain to plumbing. I thought I would be getting an estimate when in fact I got quality service and a functional bathroom. The credit has to go to the technicians and my neighbor Jose who recommended Elek. Shop around if you need to, but for my hard earned I'd recommend Elek anytime.read more

Clear the trap: If the above methods do not work, the next step would be to remove the P-trap under the sink. Place a bucket underneath the area to catch water then unscrew the two threaded caps that hold the curved section of the pipe in place. Nowadays, most kitchen drains are made of white PVC pipe with connections that can be unscrewed by hand.
 CON'T FROM COMMENTS EARLIER.  However,  the  installation took less than 3/4/ hour and was a basic regulator with no other function.  Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access.    Given that, it seems that $300 for less that  an hours worth of on site work,  company says it does not include commute time in its prices, is a little high.  While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances.  Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high.  Maybe I am wrong since I have not used their services for years and  am not knowledgeable of the costs of equipment and professional labor today.  
When you need honest, reliable plumbing, heating, or cooling services in Northern Virginia, suburban Maryland, or throughout the D.C. area, look no further than My Plumber Heating and Cooling! We’re proud to be the region’s number one choice for home comfort since 1982. Whether you’re dealing with a broken air conditioner, outdated heating system, backed-up drain, or burst pipe, our highly trained team is ready to help. We offer everything from emergency plumbing repairs to new heating and air conditioning system installation to indoor air quality services and more. Most of all, we stand behind everything we do with extensive warranties and our 100% customer satisfaction guarantee. At My Plumber Heating and Cooling, your comfort is our priority! We have three convenient locations in Manassas, Fairfax, and Fredericksburg so that you don't have to wait to get the help you need.
“I have used Central Penn for many repairs/installs over the last 15 years. They have always responded in a prompt manner and I found their people to be very friendly, efficient and competent in diagnosing and repairing any issues I had, whether related to plumbing or HVAC. Furthermore, which you can’t take for granted these days, the guys are very respectful of your home and are careful in their work and thoroughly clean up after the job is completed.”

Galvanized steel potable water supply and distribution pipes are commonly found with nominal pipe sizes from 3⁄8 inch (9.5 mm) to 2 inches (51 mm). It is rarely used today for new construction residential plumbing. Steel pipe has National Pipe Thread (NPT) standard tapered male threads, which connect with female tapered threads on elbows, tees, couplers, valves, and other fittings. Galvanized steel (often known simply as "galv" or "iron" in the plumbing trade) is relatively expensive, and difficult to work with due to weight and requirement of a pipe threader. It remains in common use for repair of existing "galv" systems and to satisfy building code non-combustibility requirements typically found in hotels, apartment buildings and other commercial applications. It is also extremely durable and resistant to mechanical abuse. Black lacquered steel pipe is the most widely used pipe material for fire sprinklers and natural gas.
If you are looking for an honest plumbing company, this is the place. Easy to schedule, and they use excellent parts. We have tried three other area companies over the years, and all left us feeling ripped off. I had to actually block one of the other companies from calling every month for 'specials'. The work ELEK has done for us is perfect. This is a really nice group of service techs, they don't try to sell you things you don't need. the home inspection is worth the money.read more
Specialized plumbing tools include pipe wrenches, flaring pliers, pipe vise, pipe bending machine, pipe cutter, dies, and joining tools such as soldering torches and crimp tools. New tools have been developed to help plumbers fix problems more efficiently. For example, plumbers use video cameras for inspections of hidden leaks or problems, they use hydro jets, and high pressure hydraulic pumps connected to steel cables for trench-less sewer line replacement.

Plumbing Service Company

×