Despite the Romans' common use of lead pipes, their aqueducts rarely poisoned people. Unlike other parts of the world where lead pipes cause poisoning, the Roman water had so much calcium in it that a layer of plaque prevented the water contacting the lead itself. What often causes confusion is the large amount of evidence of widespread lead poisoning, particularly amongst those who would have had easy access to piped water.[14] This was an unfortunate result of lead being used in cookware and as an additive to processed food and drink, for example as a preservative in wine.[15] Roman lead pipe inscriptions provided information on the owner to prevent water theft.

 CON'T FROM COMMENTS EARLIER.  However,  the  installation took less than 3/4/ hour and was a basic regulator with no other function.  Looking up the price afterwards, invoice did not list type or price, it appears that it would have cost me around $60 for the regulator and another $15 or so for the additional supplies necessary to install it and it was really a rather simple job with easy access.    Given that, it seems that $300 for less that  an hours worth of on site work,  company says it does not include commute time in its prices, is a little high.  While flat rate quotes are nice, they must take into consideration situations where the work load differs depending on the circumstances.  Therefore, unless you are at the upper end of the harder work needed than the average job. it can be argued that my estimated price of $300 for labor was more than a little high.  Maybe I am wrong since I have not used their services for years and  am not knowledgeable of the costs of equipment and professional labor today.  
The scenario is similar when it comes to hiring an electrician. The Chandler is full of novice technicians who provide lousy services. You can never rely on such workmen to provide you with good work. They will always lag in some aspect or the other. Some technicians charge a fee that is too high. These are the workmen who rip-off the customer and do not care about him. Other technicians do not use genuine parts. This leads to the coming back of the issue within a few days. You have to strike the right balance.
As first time homeowners to a 1950s home, we began to experience issues with our water drains (lucky us). We had bubbles of water coming out of our toilets after literally two minutes of taking a shower... if we continued to shower, it would back up and our tub would flood up with dirty water!  We tolerated this for a good two months and decided we really needed to get this fixed because the smell from the back up was becoming intolerable!
When something goes wrong with your plumbing system, speed is essential. The faster you address the problem, the better off you and your wallet will be. Water can quickly cause thousands of dollars in damage. Leaks can soak floors, ceilings and foundations, causing rot and mold that may make your home uninhabitable. Get a direct quote from a professional plumber.  Continue Reading

Master plumber: To become a master plumber, a person must have a certain number of years' experience as a journeyman plumber, in addition to an associate's degree or training at a vocational school. A master plumber must pass an exam that typically encompasses both written and practical knowledge. They must also complete continuing education hours every year. Oftentimes the business owner, a master plumber is subject to inspection and must make sure all journeyman plumbers working for his or her company are in compliance with plumbing regulations.
The difference between pipes and tubes is simply in the way it is sized. PVC pipe for plumbing applications and galvanized steel pipe for instance, are measured in IPS (iron pipe size). Copper tube, CPVC, PeX and other tubing is measured nominally, which is basically an average diameter. These sizing schemes allow for universal adaptation of transitional fittings. For instance, 1/2" PeX tubing is the same size as 1/2" copper tubing. 1/2" PVC on the other hand is not the same size as 1/2" tubing, and therefore requires either a threaded male or female adapter to connect them. When used in agricultural irrigation, the singular form "pipe" is often used as a plural.[19]
Don’t try to repair, replace, or install faulty or broken plumbing equipment on your own. Hire the top plumbers in town to take care of your needs! We’re capable of detecting the source of the issues fast. Trust us to advise you on the most effective solutions custom-tailored to eliminating them. Our Cincinnati plumbing company always comes prepared with the best tools and equipment. We also provide upfront pricing and money-saving deals and specials to keep more money in your pockets.
The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
Reliable Rooter Service is a licensed, bonded and insured company with over 16 years of professional plumbing experience. Members of the Greeley, Fort Collins, Loveland, and Brighton CO communities rely on the prompt and courteous service of Reliable Rooter Service every day. Over the years, we have become one of Greater Fort Collins Colorado’s most trusted and reliable plumbing companies.
If you decide to try this job yourself, be prepared to keep meticulous track of about a dozen tiny parts (put the stopper in the sink so none of them fall down the drain). There are many different faucet designs, so you may not be able to tell what to replace until you've done the disassembly. Whether you do it yourself or hire a plumber, this would be a good time to think about whether you want to upgrade the faucet with a new design.
Most recently they sent Mike out to snake a kitchen sink drain for us. Mike got here earlier than quoted and got the work done quickly so I could get out of work on time and pick up my little boy from daycare. I called them back to give a compliment about Mike. I like to let them know when they do a good job. Mike was really a great guy. I have nothing but good things to say about them. When we have an issue we call them. Their techs are personable and always make the residents laugh. They are clean and well prepared. It is a real stand up operation.
The straight sections of plumbing systems are called "pipes" or "tubes". A pipe is typically formed via casting or welding, whereas a tube is made through extrusion. Pipe normally has thicker walls and may be threaded or welded, while tubing is thinner-walled and requires special joining techniques such as brazing, compression fitting, crimping, or for plastics, solvent welding. These joining techniques are discussed in more detail in the piping and plumbing fittings article.
Master plumber: To become a master plumber, a person must have a certain number of years' experience as a journeyman plumber, in addition to an associate's degree or training at a vocational school. A master plumber must pass an exam that typically encompasses both written and practical knowledge. They must also complete continuing education hours every year. Oftentimes the business owner, a master plumber is subject to inspection and must make sure all journeyman plumbers working for his or her company are in compliance with plumbing regulations.
Hello, long story. Toilet line stopped up two years ago. A company used high pressure water to clean line. Didnt work. Came back a second time with a plummer. Spouse was told that the line had collapsed, filled with rocks or tiles. Plummer then disconnected that line put in a second line, punched a hole in my tank, fed the new line in that hole. Now two years later, each heavy rain brings a strong sewer smell into the house. Found out later that there were no rocks or tiles in original line, only a large calcium build up over 25 years that had clogged the original line. I do not know if when the new line was put in, the old line was closed properly or if either line was or should be vented? I would like the original line reconnected and the newer line just removed. I plan then to repair the hole in septic tank where the new line entered with tar or concete. I need someone to fix my smelly home.
According to standards set by the federal government, a low-flow showerhead uses no more than 2.5 gallons of water per minute at a water pressure of 80 pounds per square inch. That’s less than half the rate of water used by some older traditional showerhead models. Low-flow showerheads come in two main types, aerating, which creates a mist, or laminar-flow that sends water out in a steady stream.
This information is not intended as an offer to sell, or the solicitation of an offer to buy, a franchise. It is for information purposes only. Read More Currently, the following states regulate the offer and sale of franchises: California, Hawaii, Illinois, Indiana, Maryland, Michigan, Minnesota, New York, North Dakota, Oregon, Rhode Island, South Dakota, Virginia, Washington, and Wisconsin. If you are a resident of or want to locate a franchise in one of these states, we will not offer you a franchise unless and until we have complied with applicable pre-sale registration and disclosure requirements in your state. Read Less Mr. Rooter is a registered trademark of Mr. Rooter LLC Copyright © 2017 Mr. Rooter, All rights reserved. All Mr. Rooter Plumbing Franchise Locations Are Independently Owned And Operated.

Premier level plumbing solutions are right in your neighborhood. Bud’s Plumbing & Repair Service is your local Evansville, IN plumber specializing in full-service solutions at honest, upfront prices. In fact, we are the only plumbing company in the area offering upfront pricing. This means no surprises at the end! Want to see what your neighbors think of our services? Click here to read their reviews.
When you need honest, reliable plumbing, heating, or cooling services in Northern Virginia, suburban Maryland, or throughout the D.C. area, look no further than My Plumber Heating and Cooling! We’re proud to be the region’s number one choice for home comfort since 1982. Whether you’re dealing with a broken air conditioner, outdated heating system, backed-up drain, or burst pipe, our highly trained team is ready to help. We offer everything from emergency plumbing repairs to new heating and air conditioning system installation to indoor air quality services and more. Most of all, we stand behind everything we do with extensive warranties and our 100% customer satisfaction guarantee. At My Plumber Heating and Cooling, your comfort is our priority! We have three convenient locations in Manassas, Fairfax, and Fredericksburg so that you don't have to wait to get the help you need.

Hundreds of people trust our services. Over the last years, Plumber Chandler AZ experts have provided services to over 1000 customers. All of these customers were happy with our services. This is because of the quality that we provide with our service. Chandler Plumber have an approach that suits the customer the best. We never opt for a step that could cause discomfort to the customer. This includes buying the right spares and equipment. We get all our parts from the original manufacturers. Other technicians go for a duplicate copy that saves them money. But it is not right for the customer. Plumber Chandler AZ chooses what is right for the customer.
×